top of page

The carbon bar that lasts, as you would expect from a Syntace bar, now in a SUPERLIGHT version. The goal here was to develop a bar that is lighter and has further improved vibration dampening over the pervious models. The result is astounding: over 12% weight saving and 17% improved vibration dampening are achieved by use of a new layup and fibers especially throughout the centre of the bar.. For a modern understated look Syntace has chosen to go with a matte finish with these.   

  • Intended usage: CC / Marathon, Downhill, Enduro, Gravel, Trail

The advantages of carbon

...can only be used to their full extend if adequate manufacturing knowledge is on hand. Carbon bars can be very light-weight, but also very malicious in terms of safety. To achieve the high safety, typical for Syntace, we have used a new type of fibre and a complex arrangement of the individual fibre layers combined with a loading optimized cross section. Especially critical areas were additionally reinforced.

Faster and more comfortable

The Syntace carbon handlebar isn't only stronger than others, but it also absorbs smaller impacts and vibrations better thanks to its outstanding dampening characteristics - as well as offering an incredible steering precision.

The extreme protection

...can be seen with the naked eye. The central in-molded titanium lattice protects the handlebar from the crushing loads of the stem clamp and protects the precious carbon surface against Strength reducing wear and annoying slipping of the bar.

Position Logo™

easy centering of the bar, plus precise width scales at the handlebar ends. These allow you to cut your handlebar exactly to your preferred width, hassle-free, using the Syntace Speed Cutter.

We didn't take the easy way out

The Syntace Vector Carbon  is not available in the easily manufactured 6° sweep, but only in the 8° and 12° sweep which provides a clearly superior and ergonomically comfortable position.


Syntace Vector Carbon Hi20 SUPERLIGHT 780mm matte


    • Width (mm): 760
    • Rise (mm): 5
    • Bend (degree): 8 or 12


    • Width (mm): 720 or 760
    • Rise (mm): 10
    • Bend (degree): 8 or 12


    • Width (mm): 780
    • Rise (mm): 35
    • Bend (degree): 8 or 12


    • Width (mm): 760
    • Rise (mm): -5
    • Bend (degree): 8 or 12


    • Width (mm): 680 or 740
    • Rise (mm): -10
    • Bend (degree): 8 or 12
bottom of page