top of page

Wide, robust, and ready for every trail! The Race 30 Endurance 29” is the ideal companion to enjoy on your home trails. The weight of this wheel is as low as possible while still keeping in mind and focusing on durability. The wheel is equipped with our best-selling KillHill hub. The hub is CNC machined in our factory from aerospace grade aluminium, thus demonstrating increased fatigue strength and low weight. The anodising ensures a great look and prevents corrosion, even under the toughest circumstances. Assembled and adjusted by hand in Buggingen, Germany, the Race 30 Endurance 29” boasts the highest quality standards—guaranteed! The geometry has been optimised for a balanced, stiff wheel. The hub is finally fitted with double sealed endurance bearings to ensure flawless reliability. The rim is impact resistant and shot peen finished to increase fatigue life and durability. Also, the rim has a width of 30mm to improve tyre support, which allows lower pressure, less rolling resistance, and better grip on rough tracks. It is ideal for modern trail assembly. This wheel is completed with D-Light spokes from Sapim, which are mounted with Secure Lock nipples to maintain the spoke tension over time. The next time you cannot shuttle, you will enjoy the limited weight of this wheel, and the next uphill climb will not feel like such a chore! So, get on your bike and SEND IT!

 

PLEASE CONTACT US FOR ALTERNATIVE FREE HUB OPTIONS

TUNE Race30 Endurance 29" - black, one set left!

$1,549.00 Regular Price
$1,161.75Sale Price
  • Race 30 Endurance 29" front wheel

    weight from: 815g

    hub type: KillHill 32 holes with Aluminium Endcaps and Endurance Bearings

    spokes: SAPIM D-Light Black Inox

    max. spoke tension: 1100N

    max. rider weight: 100kg

    max.system weight: 115kg

    rim inner width: 30mm

    rim outer width: 34,5mm

    rim height: 18,5mm

    rim standard: 29"

    tubeless ready: yes

    recommended width tubeless tape: 30mm

    recommended length tubeless valve: 35mm

    tyres and max.pressure: 2,2"/2,9bar - 2,25"/2,75bar - 2,35"/2,5bar

    nipples: SAPIM Anodized, Polyax, Secure Lock

    brake interface: IS6 disc-brake interface

    colours: for hubs, nipples and Tune decals, available in all Tune anodised colours

    scope of delivery: wheel and packaging

     

    Race 30 Endurance 29" rear wheel

    weight from: 929g

    hub type: ClimbHill 32 holes with Aluminium Endcaps and Endurance Bearings

    spokes: SAPIM D-Light Black Inox

    max. spoke tension: 1100N

    max. rider weight: 100kg

    max.system weight: 115kg

    rim inner width: 30mm

    rim outer width: 34,5mm

    rim height: 18,5mm rim standard: 29"

    tubeless ready: yes

    recommended width tubeless tape: 30mm

    recommended length tubeless valve: 35mm

    tyres and max.pressure: 2,2"/2,9bar - 2,25"/2,75bar - 2,35"/2,5bar

    nipples: SAPIM Anodized, Polyax, Secure Lock

    brake interface: IS6 disc-brake interface

    colours: for hubs, nipples and Tune decals, available in all Tune anodised colours

    scope of delivery: wheel and packaging

    For IS6 brake disc installation, remove the threadlock residues of the 6 screws before installation a calibrated torque wrench to a max torque of 5Nm

    For Tubeless Tires only (with or without inner tube)

    Remove the 1.8mm spacer on your freehub to switch from HG10 to HG11 and from XD to XDR.

    Remove the two spacers (1.8mm and 0.6mm) on your freehub to switch from HG10 to HG12.

    for more information please refer to the user manual

    *Center Lock rotor mounting system licensed by Shimano

    *XD-Compatible licensed by SRAM

    *XDR Compatible licensed by SRAM

    *microspline system licensed by Shimano

     

bottom of page