top of page

If you are searching for a crazy good looking and super versatile wheelset...look no further! Our TSR35 are made for you! The aero profile section with 35mm height helps you to stay efficient in flat rides whereas its low weight and lateral stiffness will ease your climbing effort. You will be able to descend like a professional thanks to its powerful brake performance.


Its modern black matte anodized finish will convince both modern superbike-lovers and classic-bike fans. The rims are anodized twice with lasered logos. Brake surfaces are allso fully anodised in black. In order to keep the surface colour of the brake surface, it is important that you use the recommended brake pads and to get them well adjusted. As time goes by the brake surface gets back to its normal Aluminium grey colour.


Take care, with this wheelset you might never want to switch to carbon wheels!


Note: supplied with one set of Swiss Stop BXP pads.


  • Front Wheel:

    Weight: from 690g
    Hub Type: Mig 20 holes with Aluminium Endcaps and standard bearings
    Spokes: SAPIM CX Ray Black Chrom Aero Spokes
    Max. Spoke Tension: 1100N
    Max. rider weight: 100kg
    Max. system weight: 110kg
    Rim Inner Width: 19,9mm
    Rim Outer Width: 24mm
    Rim Height: 35mm
    Rim standard: 700c clincher, 700c x 24mm, 622 x 19,9mm
    Tubeless Ready: Yes
    Recommended Width Tubeless Tape: 22mm
    Recommended Length Tubeless Valve: 60mm
    Tyres and max. pressure: 25mm/7bar - 28mm/6,5bar - 33mm/5bar - 45mm/3,5bar
    ERD (measured for Tune Spoke Simulator): 568mm
    Axle type: 5x100mm
    Nipples: SAPIM Anodized, double square, Polyax, Secure Lock, 16mm
    Recommended brake pads: SwissStop BXP
    Colours: for hubs, nipples and Tune decals, available in all Tune anodised


    Rear Wheel:

    weight: from 0,809kg
    hub type: MAG 24 holes with Aluminium Endcaps and standard bearings
    spokes: SAPIM CX-Ray Aero Black INOX
    max. spoke tension 1100N
    max. rider weight: 100kg
    max.system weight: 110kg
    rim inner width: 19,9mm
    rim outer width: 24mm
    rim height: 335mm
    rim standard: 700c clincher, 700cX24mm, 622X19,9mm
    tubeless ready:  yes
    recommended width tubeless tape: 24mm
    recommended length tubeless valve: 60mm
    tyres and max.pressure: 25mm/7bar-28mm/6,5bar-33mm/5bar-45mm/3,5bar
    axle type: 5 x 130mm
    nipples: SAPIM Anodized, double square, Polyax, Secure Lock
    recommended brake pads: SwissStop BXP
    freewheel types: 3 Teeth Skyline
    freewheel standard: XDR, Shimano HG11, Shimano HG10, Campa
    colours: for hubs and nipples, available in all Tune anodised colours

bottom of page